Phoam T2 End Table -Dawn
Phoam T2 End Table -Dawn
Phoam T2 End Table -Dawn
Phoam T2 End Table -Dawn
Phoam T2 End Table -Dawn
Phoam T2 End Table -Dawn
Phoam T2 End Table -Dawn
Phoam T2 End Table -Dawn
Phoam T2 End Table -Dawn
Phoam T2 End Table -Dawn

Phoam T2 End Table -Dawn

$600.00 CAD
Quantité

The T2 is Phoam at its most compact. A perfect 12 inch cube, lower and more concentrated than the taller original, as much a sculptural plinth as an end table. The honeycomb relief wraps every face, and the arched base lifts it just clear of the floor.

Its colour is the material itself. We move our studio-recycled PLA from warm red to deep blue as the piece prints, with no paint and no coating, so the gradient lives in the object rather than on it. No two are alike, and this one shifts as you move around it, terracotta warming one face, petrol blue cooling the next, plum pooling in the honeycomb hollows between. A solid white oak top sits above, its pale open grain a quiet counterweight to the colour below.

Made in small batches in our Montréal studio. And like every Phoam, it's made to return to us at the end of its life, and become the next.

Width 30.48 cm / 12"
Depth 30.48 cm / 12"
Height 30.48 cm / 12"

Weight: 6.2 lbs / 2.8 kg
Weight capacity: 200 lbs / 90 kg

Origin: Montréal, QC. Canada
Designer: Guy Snover, 2026
Material: Cyrc-recycled PLA and Solid Oak

This product is made to order and will ship within 2 weeks.

Recycled PLA base:
Keep out of direct sun and away from heat sources. PLA begins to soften around 50–60°C (120–140°F), so keep it at normal indoor room temperature. Wipe with a soft, damp cloth and mild soap. Skip solvents, alcohol, and abrasive pads. Dust the honeycomb texture with a soft brush.

Birch top:
Wipe with a damp cloth and dry right away. Don't let water sit. Use coasters under anything wet, hot, or heavy. Keep out of prolonged sun to avoid fading.

General:
Lift, don't drag. Dust regularly to keep both surfaces looking their best.

Made in Canada
Circular Design
Phoam T2 End Table -Dawn

Phoam T2 End Table -Dawn

$600.00 CAD

Design that leaves nothing behind.

pile of products ready to be recycled

Made From What We Already Have

Our recycled PLA is made in our own studio from offcuts, failed prints, and pieces sent back to us. Nothing is extracted to make Phoam. It's built from material that already existed.

3d printing at Cyrc.

Shaped by 3D Printing, Made on Our Terms

3D printing lets us push form where casting and moulding can't, like Phoam's honeycomb relief and arched base, printed as one. We produce in our own studio, in small batches, only what we need. It's how a single machine gives us both creative range and full control over what we make and how much.

No Glue, No Paint, Nothing Hidden

No Glue, No Paint, Nothing Hidden

The color is the material, not a coating. Every piece is printed clean, in small batches, and stays fully recyclable for its whole life. What you see is exactly what it's made of.

Frequently Asked Questions

  • The base is 3D printed from recycled PLA that we make in our Montréal studio from our own offcuts, failed prints, and pieces customers return. The top is solid Birch.

  • Because we print in small batches from the recycled material we have on hand, and we never add paint, the honey gradient comes from the material itself. Every piece is a little different and genuinely one of a kind.

  • Yes. The printed base is solid and built for daily life. Avoid sharp impacts and lift rather than drag when moving it.

  • Phoam works as an end table, nightstand, or accent piece, a home for a lamp, a stack of books, or a morning coffee.

  • Keep the base out of direct sun and away from heat, since PLA softens around 50 to 60°C (120 to 140°F). Wipe both surfaces with a soft, damp cloth, dry the birch top promptly, and use coasters under anything wet, hot, or heavy.

J’adore vos produits en passant, bravo. Le vase Mariette noir, petite merveille 👌🏼

Sandra Heintz

Index Design

What you are doing with Cyrc is remarkable.

Noel Butler

Online customer

Taking a trip to the MMFA to see the new exhibition left with a magnificent vase by Cyrc offered at the museum’s boutique.

Théo Dupuis-Carbonneau

ELLE Canada

Ce vase m’a tout de suite frappé par son originalité : le design , la construction et les matériaux utilisés. Continuez ce beau travail.

Pierre

Online customer

I bought a fruit bowl and it's lovely!

Sarah Lee

Architect

Superb design and the colors are great! a piece noticed when friends visit.

Carolan Grégoire

Online customer

cyrc-phoam-short-table-redtowhitegradient-zoom.jpg

We make design objects that make living by your values effortless.

Owning a vase, a bowl, a chair shouldn't come with hidden costs, extraction, production, exploitation. So we build a different way, where nothing is externalized and nothing is wasted.

Meet Cyrc.